Carb Spring (Solid Edge ST9 Tutorial)

Serial No. 101

Carb Spring (Solid Edge ST9 Tutorial)

The Design of the model ‘Carb Spring' has been taken from Assembly file of 'Rear Exhaust-2 Shoe' of ‘Sample files’ of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.
Rest components of the model ‘Engine MKII Assembly’ (consisting of several numbers) have also been designed. You may watch them by visiting on the following playlist:-
https://www.youtube.com/playlist?list=PLKWX3xUP3pPrb1bU6P_goEUCMvcfTuqtI
.......................................................................................
Inside this video, you can see the full detailed process of making 3-D Parametric CAD Model through Solid Edge ST9.

Click the following link to get the model file: - http://bit.ly/30XR55x

Carb Spring (Siemens NX 11 Tutorial)

Serial No. 97

Carb Spring (Siemens NX 11 Tutorial)

The Design of the model ‘Carb Spring’ has been taken from Assembly file of 'Rear Exhaust-2 Shoe' of ‘Sample files’ of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.
Rest components of the model ‘Engine MKII Assembly’ (consisting of several numbers) have also been designed. You may watch them by visiting on the following playlist:-
https://www.youtube.com/playlist?list=PLKWX3xUP3pPplOPikb5S8WD4re7tAnT3-
.......................................................................................
Inside this video, you can see the full detailed process of making 3-D Parametric CAD Model through Siemens NX 11.

Click the following link to get the model file: - http://bit.ly/31Xw5x8

Carb Slide (Solid Edge ST9 Tutorial)

Serial No. 95

Carb Slide (Solid Edge ST9 Tutorial)

The Design of the model ‘Carb Slide' has been taken from Assembly file of 'Rear Exhaust-2 Shoe' of ‘Sample files’ of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.
Rest components of the model ‘Engine MKII Assembly’ (consisting of several numbers) have also been designed. You may watch them by visiting on the following playlist:-
https://www.youtube.com/playlist?list=PLKWX3xUP3pPrb1bU6P_goEUCMvcfTuqtI
.......................................................................................
Inside this video, you can see the full detailed process of making 3-D Parametric CAD Model through Solid Edge ST9.

Click the following link to get the model file: - http://bit.ly/2AZ1tj7

Carb Slide (Siemens NX 11 Tutorial)

Serial No. 91

Carb Slide (Siemens NX 11 Tutorial)

The Design of the model ‘Carb Slide’ has been taken from Assembly file of 'Rear Exhaust-2 Shoe' of ‘Sample files’ of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.
Rest components of the model ‘Engine MKII Assembly’ (consisting of several numbers) have also been designed. You may watch them by visiting on the following playlist:-
https://www.youtube.com/playlist?list=PLKWX3xUP3pPplOPikb5S8WD4re7tAnT3-
.......................................................................................
Inside this video, you can see the full detailed process of making 3-D Parametric CAD Model through Siemens NX 11.

Click the following link to get the model file: - http://bit.ly/2Mqrdu9

Carb Intake Plate (Siemens NX 11 Tutorial)

Serial No. 90

Carb Intake Plate (Siemens NX 11 Tutorial)

The Design of the model ‘Carb Intake Plate’ has been taken from Assembly file of 'Rear Exhaust-2 Shoe' of ‘Sample files’ of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.
Rest components of the model ‘Engine MKII Assembly’ (consisting of several numbers) have also been designed. You may watch them by visiting on the following playlist:-
https://www.youtube.com/playlist?list=PLKWX3xUP3pPplOPikb5S8WD4re7tAnT3-
.......................................................................................
Inside this video, you can see the full detailed process of making 3-D Parametric CAD Model through Siemens NX 11.

Click the following link to get the model file: - http://bit.ly/327Zdli

Carb Intake Plate (Solid Edge ST9 Tutorial)

Serial No. 94

Carb Intake Plate (Solid Edge ST9 Tutorial)

The Design of the model ‘Carb Intake Plate' has been taken from Assembly file of 'Rear Exhaust-2 Shoe' of ‘Sample files’ of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.
Rest components of the model ‘Engine MKII Assembly’ (consisting of several numbers) have also been designed. You may watch them by visiting on the following playlist:-
https://www.youtube.com/playlist?list=PLKWX3xUP3pPrb1bU6P_goEUCMvcfTuqtI
.......................................................................................
Inside this video, you can see the full detailed process of making 3-D Parametric CAD Model through Solid Edge ST9.

Click the following link to get the model file: - http://bit.ly/2VqDQt6

Carb High-speed needle (Siemens NX 11 Tutorial)

Serial No. 89.

Carb High-speed needle (Siemens NX 11 Tutorial)

The Design of the model ‘Carb High-speed needle ’ has been taken from Assembly file of 'Rear Exhaust-2 Shoe' of ‘Sample files’ of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.
Rest components of the model ‘Engine MKII Assembly’ (consisting of several numbers) have also been designed. You may watch them by visiting on the following playlist:-
https://www.youtube.com/playlist?list=PLKWX3xUP3pPplOPikb5S8WD4re7tAnT3-
.......................................................................................
Inside this video, you can see the full detailed process of making 3-D Parametric CAD Model through Siemens NX 11.

Click the following link to get the model file: - http://bit.ly/2Iv5RdC

Carb High-speed Needle (Solid Edge ST9 Tutorial)

Serial No. 93.

Carb High-speed Needle (Solid Edge ST9 Tutorial)

The Design of the model ‘Carb Highspeed Needle' has been taken from Assembly file of 'Rear Exhaust-2 Shoe' of ‘Sample files’ of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.
Rest components of the model ‘Engine MKII Assembly’ (consisting of several numbers) have also been designed. You may watch them by visiting on the following playlist:-
https://www.youtube.com/playlist?list=PLKWX3xUP3pPrb1bU6P_goEUCMvcfTuqtI
.......................................................................................
Inside this video, you can see the full detailed process of making 3-D Parametric CAD Model through Solid Edge ST9.

Click the following link to get the model file: - http://bit.ly/33bkI4W

Carb intake nipple (Siemens NX 11 Tutorial)

Serial No. 88

Carb intake nipple (Siemens NX 11 Tutorial)

The Design of the model ‘Carb intake nipple’ has been taken from Assembly file of 'Rear Exhaust-2 Shoe' of ‘Sample files’ of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.
Rest components of the model ‘Engine MKII Assembly’ (consisting of several numbers) have also been designed. You may watch them by visiting on the following playlist:-
https://www.youtube.com/playlist?list=PLKWX3xUP3pPplOPikb5S8WD4re7tAnT3-
.......................................................................................
Inside this video, you can see the full detailed process of making 3-D Parametric CAD Model through Siemens NX 11.

Click the following link to get the model file: -http://bit.ly/2VnUmdx

Carb intake nipple (Solid Edge ST9 Tutorial)

Serial No. 92

Carb intake nipple (Solid Edge ST9 Tutorial)

The Design of the model ‘Carb intake nipple' has been taken from Assembly file of 'Rear Exhaust-2 Shoe' of ‘Sample files’ of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.
Rest components of the model ‘Engine MKII Assembly’ (consisting of several numbers) have also been designed. You may watch them by visiting on the following playlist:-
https://www.youtube.com/playlist?list=PLKWX3xUP3pPrb1bU6P_goEUCMvcfTuqtI
.......................................................................................
Inside this video, you can see the full detailed process of making 3-D Parametric CAD Model through Solid Edge ST9.

2

Click the following link to get the model file: - http://bit.ly/2AVpx6j

Carb Slide Boot (Solid Edge ST9 Tutorial)

Serial No. 82.

Carb Slide Boot (Solid Edge ST9 Tutorial)

The Design of ‘Carb Slide Boot’ has been taken from Assembly file of 'Rear Exhaust-2 Shoe' of ‘Sample files’ of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.
Rest components of the model ‘Engine MKII Assembly’ (consisting of several numbers) have also been designed. You may watch them by visiting on the following playlist:-
https://www.youtube.com/playlist?list=PLKWX3xUP3pPrb1bU6P_goEUCMvcfTuqtI
…………………………………………………………………………………….......................
Inside this video, you can see the full detailed process of making 3-D Parametric CAD Model through Solid Edge ST9.

Click the following link to get the model file: - http://bit.ly/2Mufb2y

Carb (Siemens NX 11 Tutorial)

Serial No. 77.

Carb (Siemens NX 11 Tutorial)

The Design of ‘Carb’ has been taken from Assembly file of 'Rear Exhaust-2 Shoe' of ‘Sample files’ of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.
Rest components of the model ‘Engine MKII Assembly’ (consisting of several numbers) have also been designed. You may watch them by visiting on the following playlist:-
https://www.youtube.com/playlist?list=PLKWX3xUP3pPplOPikb5S8WD4re7tAnT3-
.......................................................................................
Inside this video, you can see the full detailed process of making 3-D Parametric CAD Model through Siemens NX 11.

Click the following link to get the model file: - http://bit.ly/30S0rzR

Carb Spring (SolidWorks 2015 Tutorial)

Serial No. 175

Carb Spring (SolidWorks 2015 Tutorial)

The Design of ‘Carb Spring’ has been taken from Assembly file of ‘Side Exhaust-2 Shoe' of Sample files of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.

In this SolidWorks Tutorial we will describe how to build the model of ‘Carb Spring’. It is a part modelling tutorial, it will cover the following topics.

• Creating 2D Sketches on different Planes of the model.
• Use the sketch constraints with help of ‘Add Relations’ tool that are applied on during sketch creation.
• Use feature commands such as Helix/Spiral, Sweep and the Extruded Cut tool.
• Use the Helix/Spiral feature for making the compression spring this feature contains a circle, the diameter of the circle controls the starting diameter of the helix.
• Use the sweep feature with the basis of circle and helix curve.

Click the following link to get the model file: -http://bit.ly/2AGTWFz

Carb Spring (Autodesk Inventor 2016 Tutorial)

Serial No. 250

Carb Spring  (Autodesk Inventor 2016 Tutorial)

The Design of ‘Carb Spring’ has been taken from Assembly file of ‘Side Exhaust-2 Shoe' of Sample files of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.

In this Inventor Tutorial we will describe how to build the model of ‘Carb Spring’. It is a part modelling tutorial, it will cover the following topics.

• Creating 2D Sketches on different Planes of the model.
• Use the sketch constraints that are applied on during sketch creation.
• Use the two features command Coil tool and Extrude tool.
• Use the Coil feature for making the compression spring along with the basis of sketch profile and wrap the profile an axis of revolution.

Click the following link to get the model file: -http://bit.ly/2ngWFlS

Carb Slide (SolidWorks 2015 Tutorial)

Serial No. 170

Carb Slide (SolidWorks 2015 Tutorial)

 

Click the following link to get the model file: -http://bit.ly/2Mhfq0R

Carb Slide (Autodesk Inventor 2016 Tutorial)

Serial No. 244

Carb Slide  (Autodesk Inventor 2016 Tutorial)

 

Click the following link to get the model file: -http://bit.ly/2ngEHQt

Carb Intake Plate (SolidWorks 2015 Tutorial)

Serial No. 168

Carb Intake Plate (SolidWorks 2015 Tutorial)

 

Click the following link to get the model file: - http://bit.ly/2VgMOJp

Carb Intake Nipple (SolidWorks 2015 Tutorial)

Serial No. 166

Carb Intake Nipple (SolidWorks 2015 Tutorial)

 

Click the following link to get the model file: -http://bit.ly/2VgMOJp

Carb Intake Nipple (Autodesk Inventor 2016 Tutorial)

Serial No. 241

Carb Intake Nipple  (Autodesk Inventor 2016 Tutorial)

 

Click the following link to get the model file: -http://bit.ly/32fJVuS

Carb Zip-Tie (SolidWorks 2015 Tutorial)

Serial No. 160

Carb Zip-Tie (SolidWorks 2015 Tutorial)

In this SolidWorks Tutorial we will describe how to build the model of ‘Carb Zip-Tie’. It is a part modelling tutorial, it will cover the following topics.

• Creating 2D Sketches on different Planes and faces of the model.
• Use the sketch constraints with the help of Add Relation tool that are applied on during sketch creation.
• Use feature commands such as Revolved Boss/Base, Extruded Boss/Base, and the fillet tool.
• Adds the angle to the Revolved Boss/Base feature to revolve the sketch profile through the specified angle.

Click the following link to get the model file: -http://bit.ly/2MelQxN