Suspension (Assembly Volume-1) Solid Edge ST9 Tutorial

Serial No. 75-A

Suspension (Assembly Volume-1) Solid Edge ST9 Tutorial

In this Solid Edge ST9 Assembly tutorial, we have created a model named ‘Suspension’. The Assembly consist of 12 Subassemblies and 43 parts (modelled as well as standard parts) that are positioned according to design intent by using Assembly Constraints.
To complete this tutorial, first get the files used for creating the assembly.
This tutorial will give you a good practice of applying constraints in an assembly and give you an idea of suspension mechanism.
To watch the designing of assembly components, visit on following link:-
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ
………………………………………….
(Rest of the Assembly is designed in Volume-2)
The Design of the model ‘Suspension’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk.

Click the following link to get the model file: - http://bit.ly/2OzRusu

E-Clip (Solid Edge ST9 Tutorial)

Serial No. 73

E-Clip (Solid Edge ST9 Tutorial)

The Design of ‘E-Clip’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: -
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ

Click the following link to get the model file: - http://bit.ly/2ICpAZ1

Miscellaneous Components of 'Suspension' Series-1 (Solid Edge ST9 Tutorial)

Serial No. 71

Miscellaneous Components of 'Suspension' Series-1 (Solid Edge ST9 Tutorial)
The Design of the components (1) 0.25 Ball, (2) Front Lower Hinge Pin, (3) Front Upper Hinge Pin (4) Shock Shaft, (5) Hex Axle Pin has been taken from Assembly file of ‘Suspension’ → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: -
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ

Click the following link to get the model file: - http://bit.ly/2otArNZ

Front Lower Arm Brace (Solid Edge ST9 Tutorial)

Serial No. 70

Front Lower Arm Brace (Solid Edge ST9 Tutorial)

The Design of ‘Front Lower Arm Brace’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: -
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ

Click the following link to get the model file: - http://bit.ly/35m8iZO

Front Upper Arm Mount (Solid Edge ST9 Tutorial)

Serial No. 69

Front Upper Arm Mount (Solid Edge ST9 Tutorial)

The Design of ‘Front Upper Arm Mount’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: -
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ

Click the following link to get the model file: - http://bit.ly/2ASwipH

Front Suspension Adjustment Clip (Solid Edge ST9 Tutorial)

Serial No. 67

Front Suspension Adjustment Clip (Solid Edge ST9 Tutorial)

The Design of ‘Front Suspension Adjustment Clip ’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: -
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ

 

Click the following link to get the model file: - http://bit.ly/35lI9uo

Ball End (Solid Edge ST9 Tutorial)

Serial No. 66

Ball End (Solid Edge ST9 Tutorial)

The Design of ‘Ball End’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: -
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ

Click the following link to get the model file: - http://bit.ly/30ZzGcT

Shock Spring Adjustment Nut (Solid Edge ST9 Tutorial)

Serial No. 64

Shock Spring Adjustment Nut (Solid Edge ST9 Tutorial)

The Design of ‘Shock Spring Adjustment Nut’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: -
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ

Click the following link to get the model file: - http://bit.ly/2Ouuxa9

Pillow Ball Retainer (Solid Edge ST9 Tutorial)

Serial No. 65

Pillow Ball Retainer (Solid Edge ST9 Tutorial)

The Design of ‘Pillow Ball Retainer’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: -
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ

 

Click the following link to get the model file: - http://bit.ly/2VrsOUo

Rear Hub Bearing (Solid Edge ST9 Tutorial)

Serial No. 63

Rear Hub Bearing (Solid Edge ST9 Tutorial)

The Design of ‘Rear Hub Bearing’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: -
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ

Click the following link to get the model file: - http://bit.ly/2nrj6Vs

Shock Bushing (Solid Edge ST9 Tutorial)

Serial No. 62

Shock Bushing (Solid Edge ST9 Tutorial)

The Design of ‘Shock Bushing’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: -
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ

 

Click the following link to get the model file: - http://bit.ly/2MpXIZh

Spring Cup (Solid Edge ST9 Tutorial)

Serial No. 61

Spring Cup (Solid Edge ST9 Tutorial)

The Design of ‘Spring Cup’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: -
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ

 

Click the following link to get the model file: - http://bit.ly/2OyTzFg

0.1875 Ball Stud 0.375 (Solid Edge ST9 Tutorial)

Serial No. 60

0.1875 Ball Stud 0.375 (Solid Edge ST9 Tutorial)

The Design of ‘0.1875 Ball Stud 0.375’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: -
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ

 

Click the following link to get the model file: - http://bit.ly/2LYRDEd

Front Hub Bearing (Solid Edge ST9 Tutorial)

Serial No. 59

Front Hub Bearing (Solid Edge ST9 Tutorial)

The Design of ‘Front Hub Bearing’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: -
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ

Click the following link to get the model file: - http://bit.ly/2AXo13A

Shock Body 1.3 Length (Solid Edge ST9 Tutorial)

Serial No. 58

Shock Body 1.3 Length (Solid Edge ST9 Tutorial)

The Design of ‘Shock Body 1.3 Length’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor. Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: - https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ

Click the following link to get the model file: - http://bit.ly/2OsOWMR

Front Shock Brace (Solid Edge ST9 Tutorial)

Serial No. 57

Front Shock Brace (Solid Edge ST9 Tutorial)

The Design of ‘Front Shock Brace’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: -
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ

Click the following link to get the model file: - http://bit.ly/2IDok8a

Shock Cartridge (Solid Edge ST9 Tutorial)

Serial No. 56

Shock Cartridge (Solid Edge ST9 Tutorial)

The Design of ‘Shock Cartridge’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: -
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ

Click the following link to get the model file: - http://bit.ly/2IzuVjW

Front Upper Arm (Solid Edge ST9 Tutorial)

Serial No. 55

Front Upper Arm (Solid Edge ST9 Tutorial)

The Design of ‘Front Upper Arm’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: -
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ

Click the following link to get the model file: - http://bit.ly/2IAHPy6

Front Lower Arm (Solid Edge ST9 Tutorial)

Serial No. 54

Front Lower Arm (Solid Edge ST9 Tutorial)

The Design of ‘Front Lower Arm ’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: -
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ

 

Click the following link to get the model file: - http://bit.ly/2MtLDSX

Hex Drive (Solid Edge ST9 Tutorial)

Serial No. 53

Hex Drive (Solid Edge ST9 Tutorial)

The Design of ‘Hex Drive ’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: -
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ

Click the following link to get the model file: - http://bit.ly/2IyJR1N