Thursday, February 7, 2019

'Vernier Caliper' (Volume-3) Solid Edge ST9 Tutorial






Serial No. 107-C

'Vernier Caliper' (Volume-3) Solid Edge ST9 Tutorial
(Rest of the model is designed in Volume 1 & 2)


 https://autode.sk/2FJZcMb


Click the following link to get the model file: - http://bit.ly/2IBUxwy




Procedure of reading of Vernier Caliper in Millimetre Scale
Total number of divisions imprinted on Linear Scale = 150
Total number of divisions imprinted on Vernier Scale = 50
Pitch of Linear Scale = total length of Linear scale/total number of divisions imprinted on
                                      Linear scale
                                   = 150 mm / 150 = 1 mm
Least count of Vernier Scale = Pitch of Linear scale / Total number of divisions on Vernier Scale
                                               = 1 mm / 50 = 0.02 mm
Reading of Linear Scale = Pitch of Linear scale x Number of divisions on Linear Scale just before the
                                            zero of Vernier Scale
                                         = 1 mm x 12 = 12 mm
Reading of Vernier Scale = Least count of Vernier Scale x Number of divisions of Vernier Scale
                                             aligned with the marking of Linear Scale
                                          = 0.02 mm x 28 = 0.56 mm
Total Reading = Reading of Linear Scale + Reading of Vernier Scale
                        = 12 mm + 0.56 mm = 12.56 mm = 1.256 cm
__________________________________________________________________
Procedure of reading of Vernier Caliper in Inch Scale
Total number of divisions imprinted on Linear Scale  = 240
Total number of divisions imprinted on Vernier Scale = 25
Pitch of Linear Scale = total length of Linear scale/total number of divisions imprinted
                                       on Linear scale
                                    = 6 inch / 240= 0.025 inch
Least count of Vernier Scale = Pitch of Linear Scale / Total number of divisions on Vernier scale
                                               = 0.025 inch / 25 = 0.001 inch
Reading of Linear Scale = Pitch of Linear scale x Number of divisions on Linear Scale just before the
                                            zero of Vernier Scale
                                         = 0.025 inch x 45 = 1.125 inch
Reading of Vernier Scale = Least count of Vernier Scale x Number of divisions of Vernier Scale
                                             aligned with the marking of Linear Scale
                                          = 0.001 inch x 14 = 0.014 inch
Total Reading = Reading of Linear Scale + Reading of Vernier Scale
                        = 1.125 inch + 0.014 inch = 1.139 inch

No comments:

Post a Comment