Bolt and Nut with Motion Simulation (Solid Edge ST9 Tutorial)

Serial No. 11

Bolt and Nut with Motion Simulation (Solid Edge ST9 Tutorial)

In this video we will describe you how to rotate the Nut on the Bolt by using ‘Motion’ command.
It will cover the following topics.
........................................................................................................
• How to set the cylindrical joint.
• How to set the Screw joint by applying screw pitch.

 

 

Click the following link to get the model file: - http://bit.ly/31XAwrU

Bolt and Nut (Solid Edge ST9 Tutorial)

Serial No. 9

Bolt and Nut (Solid Edge ST9 Tutorial)

In this Solid Edge Tutorial we will describe how to build the model ‘Bolt and Nut’ and cut the UNF External/Internal thread with the help of ‘Helical Cutout’ command. After creating the model, place the parts in to the assembly.

It will cover the following topics.

........................................................................................................

• How to set the variable name by using Variables tool.

• How to convert the dimensions into the equations.

• Creating 2D Sketches on different Planes.

• Use the sketch constraints that are applied on during sketch creation.

• Use features command such as Extrude, Revolved Cut, Cut, Intersection, Chamfer etc.

• Use the Intersection Curve command to create in intersection between model face and Work plane.

• Use a 3D section view in a PMI model view.

• How to place part the in the assembly.

• How to rotate and moving part in assembly.

 

Click the following link to get the model file: - http://bit.ly/2Ou6sAd

Bolt and Nut (Motion Simulation) Siemens-NX 10 Tutorial

Serial No. 9

Bolt and Nut (Motion Simulation) Siemens-NX 10 Tutorial

 

 

Click the following link to get the model file: -http://bit.ly/2AP39LQ

Bolt and Nut (Siemens-NX 10 Tutorial)

Serial No. 8

Bolt and Nut (Siemens-NX 10 Tutorial)

In this video, we create Bolt and Nut. In modelling of this assembly we create realistic thread by using 'Thread' tool.

 

 

Click the following link to get the model file: -http://bit.ly/2LSVmms

Animation by Precise Positioning Display in Bolt and Nut (SolidWorks 2014)

Serial No. 34

Animation by Precise Positioning Display in Bolt and Nut (SolidWorks 2014)

 

 

Click the following link to get the model file: - http://bit.ly/2piym7D

Bolt and Nut (SolidWorks 2014 Tutorial)

Serial No. 22

Bolt and Nut (SolidWorks 2014 Tutorial)

We have added the audio on this video so that you can understand it this video more easily.

In this video, we create Bolt and Nut by SolidWorks. In modelling of this assembly, Unified National Fine Thread (external and internal) profiles are used in cutting of the thread.

 

  

Click the following link to get the model file: - http://bit.ly/2on80RA

....................................................................................
Visit the following link to watch the basic tutorial on SolidWorks by us
https://www.youtube.com/playlist?list=PLb-IhKRMYSES3Zw3QHmQVqQ-rcFVzgYHy
.........................................................................
To watch more detailed tutorials on the same software visit the following link
https://www.youtube.com/playlist?list=PLKWX3xUP3pPo77gFCyy669sI76qJa5jKw
...................................................................................
Hope all of you enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe us to get latest updates about our new uploads.
http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1
....................................................................................................
Dear Viewers if you like our work and wanted to support us, to keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to the creator’s work every month/ every time they release their new work and get rewards in return. Please visit the following link to know all about our work and what we are offering a reward to our patrons…
https://www.patreon.com/nisheethsri
...................................................................................................................................

Thread Cutting in Bolt & Nut-Autodesk Inventor 2013 (with caption and audio narration)

Serial No. 205

Thread Cutting in Bolt & Nut-Autodesk Inventor 2013 (with caption and audio narration)

In this video tutorial we will show how to create a thread on a nut and bolt by using a thread profile and applying the coil tool in Autodesk Inventor. In our previous video we displayed how to create a sketch profile of a Unified and American screw (internal). We will utilize the same sketch profile here.

 

Click the following link to get the model file: - http://bit.ly/2nI85Pq

 

 Transcription of Video

1. Open the file of Bolt.
2. Start a new sketch on YZ plane of the part.
3. Activate the Slice Graphics Command.
4. This will slice away the portion of the model temporarily that hides the plane on which we want to sketch.
5. Take the project of the model by activating the Project Cut Edges tool and convert them to the construction geometry.
6. Now draw a rectangle as shown and apply a construction override on it.
7. Open the file named Unified and American screw external thread.
8. Select the sketch profile drawn in the file and copy it as displayed.
9. Switch back to the Bolt file and paste it on the sketch.
10. Add a line to close this profile.
11. Rotate this profile 90° in a clockwise direction by utilizing the Rotate Tool.
12. Pick up the Move tool and place the profile on a new location.
13. Snap it to this point of rectangle.
14. Finish the sketch and activate the coil tool, it will automatically select the thread profile.
15. Next define the Z axis of the model as the Axis for the thread cutting.
16. Switch to Coil Tab of the tool dialogue box and set the type of the coil to Pitch and Height.
17. Fill the values in the Pitch and Height input boxes.
18. Switch back to the Coil Shape Tab and Select the Operation Type to Cut.
19. Click Ok to execute the command.
20. Start a new sketch over YZ Plane.
21. Take the project of the constructed part and take the measurement between the two threads to check the pitch created by coil tool.
22. Exit from the sketch and close its visibility from the browser bar.
23. Save the file and close it.
24. Open the file of Nut.
25. Start a new sketch over the back face of the model.
26. Select the projected centre point of the model and convert it to centre point.
27. Exit the sketch and activate the hole tool.
28. It will automatically select the placement point of the hole because we applied a centre point override over the projected centre point of the part in our previous sketch.
29. Set the type of the hole to Tapped Hole.
30. Define the setting of the hole as displayed and execute the command.
31. Check the diameter of the hole by utilizing the measure tool.
32. Now select the hole feature in the browse and edit it.
33. Set the type of the hole to simple hole and execute the command.
34. Activate the chamfer tool.
35. Set the type of the chamfer to distance and angle.
36. First select the back face from which the chamfer is angled and then select this edge of the hole.
37. Fill the values in distance input box and leave the default angle value unchanged.
38. Click Ok to execute the command.
39. Start a new sketch over YZ Plane.
40. Activate the slice graphics command and the project of the model edges.
41. Convert all the lines into construction line.
42. Open the file named Unified and American screw external thread.
43. Select the sketch profile drawn in the file and copy it as displayed.
44. Switch back to the Nut file and paste it into the sketch.
45. Add a line to close this profile.
46. Rotate this profile 90° in a clockwise direction by utilizing the Rotate Tool.
47. Now draw a rectangle as shown and apply a construction override on it.
48. Pick up the Move tool and place the profile on a new location.
49. Measure the length of the Nut.
50. Activate the coil tool from the right click context menu, it will automatically select the thread profile.
51. Next define the Z axis of the model as the Axis for the thread cutting.
52. Switch to Coil Tab of the tool dialogue box and set the type of the coil to Pitch and Height.
53. Fill the values in the Pitch and Height input boxes.
54. Switch back to the Coil Shape Tab and Select the Operation Type to Cut. Next execute the command.
55. Start a new sketch over YZ Plane.
56. Take the project of the constructed part and take the measurement between the two threads to check the pitch created by coil tool.
57. Exit from the sketch and close its visibility from the browser bar.
58. Save the file.