Autodesk Inventor Basic Tutorial || Revolve and Pattern

(Tutorial Concept Curtsy – Default SolidWorks Software Help)

In this tutorial we would learn about the Revolve and Pattern Feature of Autodesk Inventor by developing a solid named ‘mhousing’. In creation process of this model we will start our work by creating some basic sketches utilising the sketch constrains and dimensions then use Revolve feature to develop a 3D solid. Later we will use an Extrude Feature and a Shell Feature to proceed ahead. Again a sketch profile will be created to apply an Extruded Cut operation to remove some material from the solid. Now we will use a Rectangular Pattern Tool and a Circular Pattern Tool to duplicate the cavity formed by our last Extruded Cut operation and to complete the model.

And after successfully completing the tutorial, all of you can watch more similar tutorials by us, to practice more and learn more…

Recommended Playlist of similar Videos by us….

https://www.youtube.com/playlist?list=PLb-IhKRMYSERYpB48aY-sZ10fN6CfXIL4

Note:--

We have given sufficient amount of pause over the tool tip and command prompt so that they can be read easily…must focus on them to learn and understand the software in detail.

Video Screen Shots

Autodesk Inventor Basic Tutorial-Revolve and Pattern VIEW SLIDE SHOW DOWNLOAD ALL

Click the following link to get the model file: -http://bit.ly/2oNweF5

Basic Techniques-Revolve and Sweep Features (SolidWorks 2014)

Serial No. 6

Basic Techniques-Revolve and Sweep Features (SolidWorks 2014) 

In this Basic Tutorial of SolidWorks we will demonstrate the utilization of part modeling feature named Revolve and Sweep.
Revolve Feature is used when we want to create a solid by revolving a closed sketch profile through a specified angle and along an axis.
Sweep Feature is used when we want to create a solid using a closed sketch profile and a path.
The aforesaid features are utilized quite an often while designing parts.  This tutorial is picked up from the default tutorials that comes up with the software. You can find its written version under Basic Techniques → Revolves and Sweeps.
Following is the description that is mentioned in the original Tutorial..

In this lesson, you will create the candlestick. This lesson demonstrates:

• Creating a revolve feature
• Creating a sweep feature
• Creating an extruded cut feature with a draft angle

Click the following link to get the model file: - http://bit.ly/2nHGXjM