Bearing Locknut Washer (SolidWorks 2015 Tutorial with Caption)

Serial No. 144

Bearing Locknut Washer (SolidWorks 2015 Tutorial with Caption)
 




Click the following link to get the model file: -http://bit.ly/31NfADU






Transcription of Video

1. Start a new Part file in SolidWorks.
2. Activate the ‘Revolved Boss/Base’ tool from the (Features toolbar) and select the Front Plane in the design window.
3. Draw the sketch profile by using the line and Offset Entities tool with the dimensions displayed onwards.
4. Exit from the sketching environment and select the axis line to create the revolve feature.
5. Change the model color to polished steel.
6. Save the part file with the name BearingLocknut Washer.
7. Activate the ‘Extruded Cut’ tool and select the bottom face of part.
8. Draw the sketch as displayed along with the dimensions.
9. The sketch is now Fully Defined, exit from the sketch, the Extrude Cute command is automatically activated.
10. Right click in the design window and choose ‘Through All’ option.
11. Open the visibility of temporary axis of the part.
12. Activate the ‘Circular Pattern’ tool and select the Cut-Extrude1 in the graphics area.
13. Define Axis of the pattern and Number of Instances as 13 in the specified input boxes.
14. Click Ok to execute the 'Circular Pattern' tool.
15. Activate Extrude Boss/Boss Feature and define the sketch plane for creating the sketch profile, as we did earlier.
16. Finish the sketch to activate the Extrude command.
17. Right click in the design window and choose ‘Mid Plane’ option, define the depth and execute command.
18. Add the fillets on the top and rear edge of the Boss-Extrude-1 feature as displayed.
19. The Model is complete so save the file.