Pipe Wrench with Motion Simulation (Solid Edge ST9 Tutorial)

Serial No. 27

Pipe Wrench with Motion Simulation (Solid Edge ST 9 Tutorial)

In this video we will describe you how to animate the assembly of ‘Pipe Wrench’ (Open and Close the Jaw) using ‘Motion’ command. It is assembly modelling tutorial. This assembly consist 1 Assembly and 9 part files (Handle, Jaw, Threading Wheel, 2 rivets, etc.) that are positioned according to design intent by using Assembly Constraints. This tutorial will give you a good practice of applying constraints in an assembly and give you an idea of Pipe Wrench mechanism.

It will cover the following topics.

........................................................................................................

• How to set the Screw joint by applying screw pitch (inch per revolution) between two components in motion analysis environment in the assembly.

• How to insert the cylindrical joint between two components.

• How to suppress the mate.

• How to create a custom UCS on the basis of 2D sketch in a part file by using ‘Coordinate System’ command.

• Use assembly commands such as Flash Fit, Axial Align mate, Angle Mate, Connect mate, Mate/Planar Align command etc.

•How to create an Angular relationship between face of two components by applying an angle value (4.77 degree) by using ‘Angle Relationship’ command.

• How to mate the parts by using ‘Flash Fit’ command in the assembly.

• How to flip the component by using ‘Flip Side’ option in ‘Flash Fit’ command in the assembly.

• How to rotate and moving part by using ‘Drag Component’ command.

• How to insert component into the assembly using drag and drop from parts library by using ‘Insert Component’ command.

 

Click the following link to get the model file: - http://bit.ly/2IxyjMc

Vise with Motion Simulation (Solid Edge ST9 Tutorial)

 

Serial No. 22

Vise with Motion Simulation (Solid Edge ST9 Tutorial)

In this video we will describe you how to animate (Open and Close the Jaw) the assembly of ‘Vise’ by using ‘Motion’ command. It is assembly modelling tutorial. This assembly consist of 1 Main assembly, 3 Subassemblies and 12 part files (Jaw Plate, threaded stud, Handle, washer, spring etc.) that are positioned according to design intent by using Assembly Constraints. This tutorial will give you a good practice of applying constraints in an assembly and give you an idea of Vise mechanism.

It will cover the following topics.

........................................................................................................

• How to set the Screw joint by applying screw pitch.

• How to play the animation by using Simulate Motion button.

• How to change the simulation setting player by using Motion Option command .

• How to suppress the mate.

• Use assembly constraints such as Axial Align mate, Planer Align mate, Mate command etc.

• How to mate the parts by using ‘Flash Fit’ command in the assembly.

• How to rotate and moving part by using ‘Drag Component’ command.

• How to insert component into the assembly using drag and drop from parts library by using ‘Insert Component’ command.

• Use ‘Show Reference Planes’ option in the assembly to mate the components more easily.

• How to use the Planar Align command to apply a relationship between selected parts.

 


 
Click the following link to get the model file: - http://bit.ly/2odfUxj

Bolt and Nut with Motion Simulation (Solid Edge ST9 Tutorial)

Serial No. 11

Bolt and Nut with Motion Simulation (Solid Edge ST9 Tutorial)

In this video we will describe you how to rotate the Nut on the Bolt by using ‘Motion’ command.
It will cover the following topics.
........................................................................................................
• How to set the cylindrical joint.
• How to set the Screw joint by applying screw pitch.

 

 

Click the following link to get the model file: - http://bit.ly/31XAwrU