Animation of ‘Vise’ || Using Creo Mechanism

This PTC Creo 3.0 tutorial will show how to animate the assembly of ‘Vise’ by using the ‘Mechanism’ application of the software. This application is used to move and analyze the motion of a Mechanism.

The Assembly of ‘Vise’ model has three sub-assemblies. To know how to create the subassemblies and it’s components watch a previous tutorial, discussed in the following blog posts.

Vise || Creo Parametric Tutorial || (Volume-1)

Vise || Creo Parametric Tutorial || (Volume-2)

First, we will place the subassembly 1 in the main assembly and assemble it at the default location. Next subassembly 3 will be placed and a pre-defined constraint set ‘Cylinder’ will be applied which provides two-axis joint, Translation and Rotation. Finally, subassembly 2 will be put in the assembly and some component references will be applied. Later we will add two Servo Motors over both axes of ‘Cylinder’ constraint set to run the whole mechanism.

The Pitch used in creating the threads over the components of Vise model is 0.125 (1/8) inch. That is why one servo motor will run at a velocity of 360°/second that will provide rotating motion and second servo motor will run at a velocity of 0.125 inches/second which will provide translation motion. When we run the Dynamic Analysis for 8 seconds the jaws of vise will open the gap between them will be 1 inch.

By watching this tutorial viewers will observe as well as learn the following tools/commands of the software:--

1. Placing components in the assembly.
2. Applying component references to fully constrained components
3. Using pre-defined constraint set which are used for creating mechanism.
4. Using Creo Mechanism Application.
5. Inserting Servo Motor.
6. Dynamic Analysis of Mechanism.
7. Using Playback command which is used to replay the previously run analysis.

Note:--
………………..

To understand the video easily, focus over places where we have paused our mouse. This is done so as the viewers can easily read the tooltips generated by the software and understand what is being done and why.
...................................................

Visit the following link to get files to complete the tutorial and the finished file …http://bit.ly/2N605AV

 

 

....................................................................................

Visit the following link to watch basic tutorial on Creo Parametric by me

https://www.youtube.com/playlist?list=PLhloyISzAQksnPmtyZtncWCQJ3NpoX_SW

.........................................................................

To watch detailed tutorials on the same software visit the following link:--

https://www.youtube.com/playlist?list=PLKWX3xUP3pPorULULn8Q5BbDXqBjK_ZXD

..........................................................................................

Hope all of you will enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe us to get latest updates about our new uploads.

http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1

Animation of ‘Bolt and Nut’ || Using Creo Mechanism

This PTC Creo 3.0 tutorial will show how to animate the assembly of ‘Bolt and Nut’ using the Creo Mechanism application. This application is used to move and analyze the motion of a Mechanism.

First, we will place the Bolt part in the assembly and assemble it at default location. Next, we will place the Bolt part and a pre-defined constraint set ‘Cylinder’ will be applied which provides two-axis joints, Translation and Rotation. Later we will apply two Servo Motors on both axes to run the Nut over the Bolt like a screw mechanism. 

The Pitch used in creating the Bolt and Nut is 0.05 (1/20) inch. That is why one servo motor will run at a velocity of 360°/second that will provide rotating motion and second servo motor will run at a velocity of 0.05 inch/second which will provide translation motion. When we run the Dynamic Analysis for 20 seconds the Nut will travel 1-inch distance over the Bolt.

By watching this tutorial viewers will observe as well as learn the following tools/commands of the software:--

1. Placing components in assembly.
2. Applying component references to fully constrained components
3. Using pre-defined constraint set which are used for creating mechanism.
4. Using Creo Mechanism Application.
5. Inserting Servo Motor.
6. Dynamic Analysis of Mechanism.
7. Using Playback command which is used to replay the previously run analysis.

Note:--
………………..

To understand the video easily, focus over places where we have paused our mouse. This is done so as the viewers can easily read the command instructions/tooltips generated by the software and understand what is being done and why.
.............................

 

Visit the following link to get files to complete the tutorial and the finished file …http://bit.ly/2MGnqdx

 

....................................................................................

Visit the following link to watch basic tutorial on Creo Parametric by me

https://www.youtube.com/playlist?list=PLhloyISzAQksnPmtyZtncWCQJ3NpoX_SW

.........................................................................

To watch detailed tutorials on the same software visit the following link:--

https://www.youtube.com/playlist?list=PLKWX3xUP3pPorULULn8Q5BbDXqBjK_ZXD

..........................................................................................

Hope all of you will enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe us to get latest updates about our new uploads.

http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1

Animation of Hinge || Using Creo Mechanism

This PTC Creo 3.0 tutorial will show how to animate the model of a ‘Hinge’ using the Creo Mechanism application. This application is used to move and analyze the motion of a Mechanism.
The Hinge model has three parts. First, we will put them in the assembly and apply constraints between them. A pre-defined constraint set will be used to create a ‘Pin Mechanism’.  Later by using a Servo Motor we will run the pin mechanism.
The Servo Motor will run at a velocity of 10 deg/sec. And total Dynamic Analysis of mechanism will run for 19.1 seconds.

By watching this tutorial viewers will observe and learn the following tools/commands of the software:--

1. Placing components in assembly.
2. Applying component references to fully constrain components
3. Applying constraints between parts
4. Using pre-defined constraint set which are used for creating mechanism.
5. Using Creo Mechanism Application.
6. Inserting Servo Motor.
7. Dynamic Analysis of Mechanism.
8. Using Playback command which is used to replay the previously run analysis.

Note:--
………………..

To understand the video easily, focus over places where we have paused our mouse. This is done so as the viewers can easily read the command instructions/tooltips generated by the software and understand what is being done and why.

...................................................

 

Visit the following link to get files to complete the tutorial and the finished file …  http://bit.ly/2W5rE16

 

....................................................................................

Visit the following link to watch basic tutorial on Creo Parametric by me

https://www.youtube.com/playlist?list=PLhloyISzAQksnPmtyZtncWCQJ3NpoX_SW

.........................................................................

To watch detailed tutorials on the same software visit the following link:--

https://www.youtube.com/playlist?list=PLKWX3xUP3pPorULULn8Q5BbDXqBjK_ZXD

..........................................................................................

Hope all of you will enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe us to get latest updates about our new uploads.

http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1

Pipe Wrench with Motion Simulation (Solid Edge ST9 Tutorial)

Serial No. 27

Pipe Wrench with Motion Simulation (Solid Edge ST 9 Tutorial)

In this video we will describe you how to animate the assembly of ‘Pipe Wrench’ (Open and Close the Jaw) using ‘Motion’ command. It is assembly modelling tutorial. This assembly consist 1 Assembly and 9 part files (Handle, Jaw, Threading Wheel, 2 rivets, etc.) that are positioned according to design intent by using Assembly Constraints. This tutorial will give you a good practice of applying constraints in an assembly and give you an idea of Pipe Wrench mechanism.

It will cover the following topics.

........................................................................................................

• How to set the Screw joint by applying screw pitch (inch per revolution) between two components in motion analysis environment in the assembly.

• How to insert the cylindrical joint between two components.

• How to suppress the mate.

• How to create a custom UCS on the basis of 2D sketch in a part file by using ‘Coordinate System’ command.

• Use assembly commands such as Flash Fit, Axial Align mate, Angle Mate, Connect mate, Mate/Planar Align command etc.

•How to create an Angular relationship between face of two components by applying an angle value (4.77 degree) by using ‘Angle Relationship’ command.

• How to mate the parts by using ‘Flash Fit’ command in the assembly.

• How to flip the component by using ‘Flip Side’ option in ‘Flash Fit’ command in the assembly.

• How to rotate and moving part by using ‘Drag Component’ command.

• How to insert component into the assembly using drag and drop from parts library by using ‘Insert Component’ command.

 

Click the following link to get the model file: - http://bit.ly/2IxyjMc

Vise with Motion Simulation (Solid Edge ST9 Tutorial)

 

Serial No. 22

Vise with Motion Simulation (Solid Edge ST9 Tutorial)

In this video we will describe you how to animate (Open and Close the Jaw) the assembly of ‘Vise’ by using ‘Motion’ command. It is assembly modelling tutorial. This assembly consist of 1 Main assembly, 3 Subassemblies and 12 part files (Jaw Plate, threaded stud, Handle, washer, spring etc.) that are positioned according to design intent by using Assembly Constraints. This tutorial will give you a good practice of applying constraints in an assembly and give you an idea of Vise mechanism.

It will cover the following topics.

........................................................................................................

• How to set the Screw joint by applying screw pitch.

• How to play the animation by using Simulate Motion button.

• How to change the simulation setting player by using Motion Option command .

• How to suppress the mate.

• Use assembly constraints such as Axial Align mate, Planer Align mate, Mate command etc.

• How to mate the parts by using ‘Flash Fit’ command in the assembly.

• How to rotate and moving part by using ‘Drag Component’ command.

• How to insert component into the assembly using drag and drop from parts library by using ‘Insert Component’ command.

• Use ‘Show Reference Planes’ option in the assembly to mate the components more easily.

• How to use the Planar Align command to apply a relationship between selected parts.

 


 
Click the following link to get the model file: - http://bit.ly/2odfUxj

Bolt and Nut with Motion Simulation (Solid Edge ST9 Tutorial)

Serial No. 11

Bolt and Nut with Motion Simulation (Solid Edge ST9 Tutorial)

In this video we will describe you how to rotate the Nut on the Bolt by using ‘Motion’ command.
It will cover the following topics.
........................................................................................................
• How to set the cylindrical joint.
• How to set the Screw joint by applying screw pitch.

 

 

Click the following link to get the model file: - http://bit.ly/31XAwrU

Cam and Follower - Modelling and Motion Simulation (Video Tutorial) Siemens NX 10

Serial No. 23

Cam and Follower - Modelling and Motion Simulation (Video Tutorial) Siemens NX 10

In this video we will display how to create and simulate a ‘Cam and Follower’ assembly. Initially we will show the way to create cam and follower parts next we will place them in assembly. To animate this assembly we will use Motion Simulation Application of Siemens NX where we will apply different joints like Slider, Revolute and Curve on Curve constraint.

 

Click the following link to get the model file: -http://bit.ly/2AM2M4M

Helical Gear (Internal) - Motion Simulation (Video Tutorial) Siemens NX 10

Serial No. 22

Helical Gear (Internal) - Motion Simulation (Video Tutorial) Siemens NX 10

In this video we will describe, how to simulate the ‘Helical Gear (Internal)’ with different joints, Gear joint, Revolute joint and so on in Motion Simulation Application Environment.

 

Click the following link to get the model file: -http://bit.ly/35bb4RJ

Rack and Pinion - Motion Simulation (Video Tutorial) Siemens NX 10

Serial No. 21

Rack and Pinion - Motion Simulation (Video Tutorial) Siemens NX 10

In this video we will describe, how to simulate the ‘Rack and Pinion’ with different joints, Rack and Pinion joint, Slider joint,Revolute joint and so on in Motion Simulation Application Environment.

 

Click the following link to get the model file: -http://bit.ly/2Mjg9yJ

Worm Gear-Motion Simulation (Video Tutorial) Siemens NX 10

Serial No. 20

Worm Gear - Motion Simulation (Video Tutorial) Siemens NX 10

In this video we will describe, how to simulate the ‘Worm Gear’ with different joints, Gear joint, Revolute joint and so on in Motion Simulation Application Environment.

 

Click the following link to get the model file: -http://bit.ly/2OqTm6W

Bevel Gear-Motion Simulation (Video Tutorial) Siemens NX 10

Serial No. 19

Bevel Gear - Motion Simulation (Video Tutorial) Siemens NX 10

In this video we will describe, how to simulate the ‘Bevel Gear’ with different joints, Gear joint, Revolute joint and so on in Motion Simulation Application Environment.

Click the following link to get the model file: -http://bit.ly/359dmAO

Helical Gear - Motion Simulation (Video Tutorial) Siemens NX 10

Serial No. 18

Helical Gear - Motion Simulation (Video Tutorial) Siemens NX 10

In this video we will describe, how to simulate the ‘Helical Gear’ with different joints, Gear joint, Revolute joint and so on in Motion Simulation Application Environment.

 

Click the following link to get the model file: -http://bit.ly/2ItRLt1

Drill Machine - Motion Simulation (Video Tutorial) Siemens NX 10

Serial No. 16.

Drill Machine - Motion Simulation (Video Tutorial) Siemens NX 10



In this video we will describe, how to simulate the assembly of ‘Drill Machine’ with different joints, Gear joint, Revolute joint and so on in Motion Simulation Application Environment.

 


Click the following link to get the model file: - http://bit.ly/2nmTWY5

Vise - Motion Simulation (Video Tutorial) Siemens NX 10

Serial No. 14

Vise - Motion Simulation (Video Tutorial) Siemens NX 10

In this video we will describe, how to simulate the assembly of 'Vise' with different joints,  Slider joint, Cylindrical joint, Screw joint Revolute joint and create a link between three Subassemblies in Motion Simulation Application Environment.

 

 

Click the following link to get the model file: -http://bit.ly/336HZ81

Pipe Wrench - Motion Simulation (Video Tutorial) Siemens NX 10

Serial No. 11

Pipe Wrench - Motion Simulation (Video Tutorial) Siemens NX 10

 

Click the following link to get the model file: - http://bit.ly/31S6Dt0

Bolt and Nut (Motion Simulation) Siemens-NX 10 Tutorial

Serial No. 9

Bolt and Nut (Motion Simulation) Siemens-NX 10 Tutorial

 

 

Click the following link to get the model file: -http://bit.ly/2AP39LQ