Box (mini size) - Video Tutorial (Siemens NX 11)

Serial No. 70.

Box (mini size) - Video Tutorial (Siemens NX 11)

In this Siemens Nx Tutorial we will describe how to build the model of a ‘Box (Mini Size)’ through sheet metal features. It is a part and assembly modeling tutorial, 10 Parts and 3 Assemblies has been created (2 sheet metal parts and 8 other parts) like Box base, Box cover, Wire, Hinge, Sliding and so on in the assembly environment with the help of ‘Create New Component’ command.

It will cover the following topics.

........................................................................................................

• Creating 2D Sketches on different Planes.

• Use the sketch constraints that are applied on during sketch creation.

• Use Sheet metal features such as Tab, Flange, Closed Corner and Flat Pattern.

• Use feature commands such as Extrude, Edge Blend, Mirror feature, Sweep along Guide, Trim body, Unite etc.

• How to set thickness of the sheet and Bend radius by using Sheet Metal Preferences.

• How to create a base feature by extruding a sketch along vector by thickness value by using Tab command.

• How to add a flange at an angle to planar face.

• How to create top-down assembly modelling in Siemens NX software.

• How to remove the degree of freedom of the parts with the help of ‘Assembly Constraints’ command.

• How to rotate the part by using ‘Move Component’ command.

• How to smooth the edges of model by using ‘Visualization Preferences’ command.

 

Click the following link to get the model file: - http://bit.ly/2VqZHk7

Extrude with an Asymmetric Angle (Video Tutorial with Caption) Siemens-NX 10

Serial No. 66

Extrude with an Asymmetric Angle (Video Tutorial with Caption) Siemens-NX 10

The Design of this model is selected from NX 10 Help:--
Go to CAD → Modelling → Feature Modelling → Design feature → Extrude.
This example shows how to extrude a draft with an asymmetric angle.

 

 

Click the following link to get the model file: - http://bit.ly/2AMGEHA

Suspension (Volume-2) Siemens NX 10 Tutorial

 

Serial No. 64-B.

Suspension (Volume-2) Siemens NX 10 Tutorial

In this Siemens NX assembly tutorial, we have created a model named ‘Suspension’. The assembly consist of 12 Subassemblies and 43 parts (modelled as well as standard parts) that are positioned according to design intent by using Assembly Constraints.
To complete this tutorial, first get the files used for creating the assembly.
This tutorial will give you a good practice of applying constraints in an assembly and give you an idea of suspension mechanism.
To watch the designing of assembly components, visit on following link:-
https://www.youtube.com/playlist?list=PLKWX3xUP3pPo0_EiKA9ypTPvI9h7A3lgX
………………………………………….
(Starting of the Assembly is designed in Volume-1)
The Design of the model ‘Suspension’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
______________________________________________________________
Use the Assembly Arrangements command to define alternative positions for one or more components or subassemblies in your part. You can move or suppress components to create an alternate arrangement.
Arrangements are created in assemblies or subassemblies and must have one active arrangement and one default arrangement or one arrangement that is both the active and the default arrangement. You can create as many arrangements as you want.

 

If you want to view the newer version of this video, we have uploaded this video with audio narration only in One Volume on our YouTube channel.  Please you can watch this video so that you can understand it easily.

 

Click the following link to get the model file: - http://bit.ly/2IrOGd2

 

 

 

........................................................................
Visit the following link to watch more tutorial on Siemens NX by us
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpUvtPuzEPoHimjTjpdbl_Q
.........................................................................
Hope all of you enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe me to get latest updates about my new uploads….
http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1
....................................................................................................
Dear Viewers if you like our work and wanted to support us, to keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to the creator’s work every month/ every time they release their new work and get rewards in return. Please visit the following link to know all about our work and what we are offering as the reward to our patrons…
https://www.patreon.com/nisheethsri
...............................................................…

Suspension (Volume-1) Siemens NX 10 Tutorial

 

Serial No. 64-A.

Suspension (Volume-1) Siemens NX 10 Tutorial

In this Siemens NX assembly tutorial, we have created a model named ‘Suspension’. The assembly consist of 12 Subassemblies and 43 parts (modelled as well as standard parts) that are positioned according to design intent by using Assembly Constraints.
To complete this tutorial, first get the files used for creating the assembly.
This tutorial will give you a good practice of applying constraints in an assembly and give you an idea of suspension mechanism.
To watch the designing of assembly components, visit on following link:-
https://www.youtube.com/playlist?list=PLKWX3xUP3pPo0_EiKA9ypTPvI9h7A3lgX
………………………………………….
(Rest of the Assembly is designed in Volume-2)
The Design of the model ‘Suspension’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
____________________________________________________________
Use the Assembly Arrangements command to define alternative positions for one or more components or subassemblies in your part. You can move or suppress components to create an alternate arrangement.
Arrangements are created in assemblies or subassemblies and must have one active arrangement and one default arrangement or one arrangement that is both the active and the default arrangement. You can create as many arrangements as you want.

If you want to get the newer version of this video, we have uploaded this video with audio narration only One Volume on our YouTube channel.  Please you can watch this video so that you can understand it easily.

 

 

Click the following link to get the model file: - http://bit.ly/2IrOGd2

 

 

 

.........................................................................
Visit the following link to watch more tutorial on Siemens NX by us
https://www.youtube.com/playlist?list=PLKWX3xUP3pPpUvtPuzEPoHimjTjpdbl_Q
.........................................................................
Hope all of you enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe me to get latest updates about my new uploads….
http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1
....................................................................................................
Dear Viewers if you like our work and wanted to support us, to keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to the creator’s work every month/ every time they release their new work and get rewards in return. Please visit the following link to know all about our work and what we are offering as the reward to our patrons…
https://www.patreon.com/nisheethsri
...............................................................…

Pillow Ball (Video Tutorial) Siemens NX 10

Serial No. 71

Pillow Ball (Video Tutorial) Siemens NX 10

The Design of ‘Pillow Ball’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: - https://www.youtube.com/playlist?list=PLKWX3xUP3pPo0_EiKA9ypTPvI9h7A3lgX

Click the following link to get the model file: - http://bit.ly/33c7Rzv

Miscellaneous Components of 'Suspension' Series-2 (Siemens NX 10)

Serial No. 63.

Miscellaneous Components of 'Suspension' Series-2 (Siemens NX 10)

The Design of the components (1) Shock Cartridge Cover, (2) Pillow Ball Bushing, (3) Hex Retaining O-Ring (4) O-Ring, (5) Shock Cartridge Spacer has been taken from Assembly file of ‘Suspension’ → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: - https://www.youtube.com/playlist?list=PLKWX3xUP3pPo0_EiKA9ypTPvI9h7A3lgX

 

Click the following link to get the model file: - http://bit.ly/35fEpuc

Miscellaneous Components of 'Suspension' Series-1 (Siemens NX 10)

Serial No. 62.

Miscellaneous Components of 'Suspension' Series-1 (Siemens NX 10)

The Design of the components (1) 0.25 Ball, (2) Front Lower Hinge Pin, (3) Front Upper Hinge Pin (4) Shock Shaft, (5) Hex Axle Pin has been taken from Assembly file of ‘Suspension’ → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: - https://www.youtube.com/playlist?list=PLKWX3xUP3pPo0_EiKA9ypTPvI9h7A3lgX

 

Click the following link to get the model file: - http://bit.ly/2MoVkBW

E-Clip (Video Tutorial) Siemens NX 10

Serial No. 61.

E-Clip (Video Tutorial) Siemens NX 10

The Design of ‘E-Clip’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: - https://www.youtube.com/playlist?list=PLKWX3xUP3pPo0_EiKA9ypTPvI9h7A3lgX

 

Click the following link to get the model file: - http://bit.ly/2VkKPUp

Front Lower Arm Brace (Video Tutorial) Siemens NX 10

Serial No. 60.

Front Lower Arm Brace (Video Tutorial) Siemens NX 10

Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: - https://www.youtube.com/playlist?list=PLKWX3xUP3pPo0_EiKA9ypTPvI9h7A3lgX

 

Click the following link to get the model file: - http://bit.ly/2LRqB1n

Ball End (Video Tutorial) Siemens NX 10

Serial No. 59.

Ball End (Video Tutorial) Siemens NX 10

The Design of ‘Ball End’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: - https://www.youtube.com/playlist?list=PLKWX3xUP3pPo0_EiKA9ypTPvI9h7A3lgX
..........................................................................................................
In this video we have shown, how to divide a face into two faces by using a datum Plane with the help of ‘Divide Face’ command. How to use the ‘Draft’ command to modify the direction of face on the basis of ‘Parting Face’ option.

 

Click the following link to get the model file: - http://bit.ly/35doblf

Piston (Video Tutorial) Siemens NX 10

Serial No. 58.

Piston (Video Tutorial) Siemens NX 10

The Design of ‘Piston’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: - https://www.youtube.com/playlist?list=PLKWX3xUP3pPo0_EiKA9ypTPvI9h7A3lgX

 

Click the following link to get the model file: - http://bit.ly/2nuyq3S

Front Suspension Adjustment Clip (Video Tutorial) Siemens NX 10

Serial No. 57.

Front Suspension Adjustment Clip (Video Tutorial) Siemens NX 10

The Design of ‘Front Suspension Adjustment Clip’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: - https://www.youtube.com/playlist?list=PLKWX3xUP3pPo0_EiKA9ypTPvI9h7A3lgX

 

Click the following link to get the model file: - http://bit.ly/2VkVcr9

Shock Spring Adjustment Nut (Video Tutorial) Siemens NX 10

Serial No. 56.

Shock Spring Adjustment Nut (Video Tutorial) Siemens NX 10

The Design of ‘Shock Spring Adjustment Nut’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: - https://www.youtube.com/playlist?list=PLKWX3xUP3pPo0_EiKA9ypTPvI9h7A3lgX

Click the following link to get the model file: - http://bit.ly/35ctXDP

Pillow Ball Retainer (Video Tutorial) Siemens NX 10

Serial No. 55.

Pillow Ball Retainer (Video Tutorial) Siemens NX 10

The Design of ‘Pillow Ball Retainer’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: - https://www.youtube.com/playlist?list=PLKWX3xUP3pPo0_EiKA9ypTPvI9h7A3lgX

 

 

Click the following link to get the model file: - http://bit.ly/2IwD9cm

Shock Bushing (Video Tutorial) Siemens NX 10

Serial No. 54.

Shock Bushing (Video Tutorial) Siemens NX 10

The Design of ‘Shock Bushing’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: - https://www.youtube.com/playlist?list=PLKWX3xUP3pPo0_EiKA9ypTPvI9h7A3lgX

 

Click the following link to get the model file: - http://bit.ly/2Mhlre6

Rear Hub Bearing (Video Tutorial) Siemens NX 10

Serial No. 53.

Rear Hub Bearing (Video Tutorial) Siemens NX 10

The Design of ‘Rear Hub Bearing’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: - https://www.youtube.com/playlist?list=PLKWX3xUP3pPo0_EiKA9ypTPvI9h7A3lgX

 

 

Click the following link to get the model file: - http://bit.ly/2oli3qD

Spring Cup (Video Tutorial) Siemens NX 10

Serial No. 52.

Spring Cup (Video Tutorial) Siemens NX 10

The Design of ‘Spring Cup’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: - https://www.youtube.com/playlist?list=PLKWX3xUP3pPo0_EiKA9ypTPvI9h7A3lgX

 

 

Click the following link to get the model file: - http://bit.ly/2LRHUzu

0.1875 Ball stud 0.375 (Video Tutorial) Siemens NX 10

Serial No. 51.

0.1875 Ball stud 0.375 (Video Tutorial) Siemens NX 10

The Design of ‘0.1875 Ball stud 0.375’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: - https://www.youtube.com/playlist?list=PLKWX3xUP3pPo0_EiKA9ypTPvI9h7A3lgX

 

Click the following link to get the model file: - http://bit.ly/30WXnlT

Front Hub Bearing (Video Tutorial) Siemens NX 10

Serial No. 50.

Front Hub Bearing (Video Tutorial) Siemens NX 10

The Design of ‘Front Hub Bearing’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: - https://www.youtube.com/playlist?list=PLKWX3xUP3pPo0_EiKA9ypTPvI9h7A3lgX

 

Click the following link to get the model file: - http://bit.ly/31U4tsV

Shock Body 1.3 Length (Video Tutorial) Siemens NX 10

Serial No. 49.

Shock Body 1.3 Length (Video Tutorial) Siemens NX 10

The Design of ‘Shock Body 1.3 Length’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
Rest components of the model ‘Suspension Assembly’ (consisting in several numbers) have also been designed. You may watch them by visiting on following playlist: - https://www.youtube.com/playlist?list=PLKWX3xUP3pPo0_EiKA9ypTPvI9h7A3lgX

 

Click the following link to get the model file: - http://bit.ly/357NUf7