Building a Simple Slider Assembly ‘Solid Edge ST9’

Serial No. 5

Building a Simple Slider Assembly ‘Solid Edge ST9’

This tutorial provides step-by-step instructions for building the linear guide assembly shown in the
illustration above. As you build this assembly, you will learn techniques such as:
• Applying assembly relationships between parts.
• Using Path Finder to manage parts in the assembly.
• Applying fixed and floating offsets to relationships.
• Managing subassemblies within an assembly.
• Patterning parts in an assembly.
This tutorial introduces the Solid Edge: Assembly environment and provides sufficient instruction so you can continue learning on your own.

Click the following link to get the model file: - http://bit.ly/2OrAZyu

Introduction to Synchronous Modelling ‘Solid Edge ST9’

Serial No. 4

Introduction to Synchronous Modelling ‘Solid Edge ST9’

The model is selected from ‘3D Sync Test drive’ E-Book.

____________________________________________________

This tutorial demonstrates a typical workflow for creating synchronous features. It covers the
fundamental techniques for drawing sketches and constructing and editing features.
This tutorial introduces basic concepts that other tutorials rely upon, so it is a good place to start
if you are a beginner.
Learn various techniques for creating synchronous features, such as:
• Drawing and dimensioning sketches
• Constructing features
• Dimensioning model edges
• Working with PathFinder
• Editing features

Click the following link to get the model file: - http://bit.ly/35itqQU

Download the ‘Solid Edge Testdrive’ E-Book by visiting the following link:-- http://a360.co/2fDrFqT

Intermediate Part Modelling with Synchronous Features ‘Solid Edge ST9’

Serial No. 3

Intermediate Part Modelling with Synchronous Features ‘Solid Edge ST9’

The model is selected from ‘3D Sync Test drive’ E-Book.

_______________________________________________

This tutorial demonstrates typical techniques for creating and modifying synchronous features. It covers techniques such as defining temporary and permanent relationships between faces using the face relationship commands on the Home tab → Face Relate group, evaluating and controlling model edits using the Design Intent panel, and moving faces using the steering wheel.

This is an intermediate tutorial. You might find it easier to follow if you first complete the Introduction to modeling synchronous features tutorial.

This tutorial covers techniques such as:

• Defining temporary and permanent relationships between faces using the command bar for each of the Relationship commands in the face Relate group.

• Moving faces using the steering wheel.

• Design Intent panel.

• Selection Manager.

 

Click the following link to get the model file: - http://bit.ly/2MqXnFx

Download the ‘Solid Edge Testdrive’ E-Book by visiting the following link:-- http://a360.co/2fDrFqT