Ball End (Autodesk Inventor 2016 Tutorial)

Serial No. 260

Ball End  (Autodesk Inventor 2016 Tutorial)

The Design of the model ‘Ball End’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.

In this Inventor Tutorial we will describe how to build the model of ‘Ball End’. It is a part modelling tutorial, it will cover the following topics.

• Creating 2D Sketches on different Planes of the model.
• Use the sketch constraints that are applied on during sketch creation.
• Use feature commands such as Revolve, Extrude, Split, Face Draft, Hole, Fillet and Chamfer tool.
• Splitting a particular face of the model with the basis of work plane by using Split command.

Click the following link to get the model file: -http://bit.ly/2mxyKOO

Front Hub Carrier L (Autodesk Inventor 2016 Tutorial)

Serial No. 256

Front Hub Carrier L  (Autodesk Inventor 2016 Tutorial)

The Design of the model ‘Front Carrier L’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.

In this Inventor Tutorial we will describe how to build the model of ‘Front Carrier L’. ‘Front Hub Carrier R’ (used as a derived component) has also been created by using ‘Derived Component’ command. It is a part modelling tutorial, it will cover the following topics.

• Creating 2D Sketches on different Planes of the model.
• Use the sketch constraints that are applied on during sketch creation.
• Use feature commands such as Revolve, Extrude, Rib, Face Draft, Chamfer, Hole, Thread, Derived Component and Fillet tool.
• Adds the angle to the Revolve feature with Cut option to revolve the profile through the specified angle.
• Adds the Tapped hole on the model with thread by using the Hole tool.

Click the following link to get the model file: -http://bit.ly/2n5pEZX

Tire-2 (Autodesk Inventor 2016 Tutorial)

Serial No. 254

Tire-2  (Autodesk Inventor 2016 Tutorial)

We have added the audio on this video so that you can understand this video more easily. The design of the model has been taken from our Suspension Assembly. Full assembly video link is on here:- https://youtu.be/-qcIYVh9Y_Y

In this Inventor Tutorial we will describe how to build the model of ‘Tire-2’. It is a part modelling tutorial, it will cover the following topics. 

• Creating 2D Sketches on different Planes of the model.
• Use the sketch constraints that are applied on during sketch creation.
• Use feature commands such as Revolve, Revolve Surface, Extrude, Circular Pattern, Fillet and Mirror tool.
• Use Circular Pattern tool to create multiple instances of one feature.

 

Click the following link to get the model file: -http://bit.ly/2mtteg5

....................................................................................................
Visit the following link to watch the basic tutorial on Autodesk Inventor by us
https://www.youtube.com/playlist?list=PLb-IhKRMYSERYpB48aY-sZ10fN6CfXIL4
.........................................................................
To watch detailed tutorials on the same software visit the following link
https://www.youtube.com/playlist?list=PL74BDF7431ED13443
..........................................................................................
Hope all of you enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe us to get latest updates about our new uploads.
http://www.youtube.com/user/niveshandnisheeth?sub_confirmation=1
....................................................................................................
Dear Viewers if you like our work and wanted to support us, to keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to the creator’s work every month/ every time they release their new work and get rewards in return. Please visit the following link to know all about our work and what we are offering as the reward to our patrons…
https://www.patreon.com/nisheethsri+

Wheel (Autodesk Inventor 2016 Tutorial)

Serial No. 253

Wheel (Autodesk Inventor 2016 Tutorial)

We have added the audio on this video so that you can understand it this video more easily. The Design of the model ‘Wheel’ has been taken from Assembly file of 'Suspension' → ‘Sample files’ → Autodesk Inventor.
In this Inventor Tutorial we will describe how to build the model of ‘Wheel’. It is a part modelling tutorial, it will cover the following topics.

• Creating 2D Sketches on different Planes of the model.
• Use the sketch constraints that are applied on during sketch creation.
• Use feature commands such as Revolve, Extrude, Circular Pattern, Hole and Fillet tool.
• Use Circular Pattern tool to create multiple instances of one feature.
• Adds angle in the Extrude feature to set the angle for cutting the taper hole.

/p>

 

Click the following link to get the model file: -http://bit.ly/2n7vLgo

....................................................................................................
Visit the following link to watch the basic tutorial on Autodesk Inventor by us
https://www.youtube.com/playlist?list=PLb-IhKRMYSERYpB48aY-sZ10fN6CfXIL4
.........................................................................
To watch detailed tutorials on the same software visit the following link
https://www.youtube.com/playlist?list=PL74BDF7431ED13443
..........................................................................................
Hope all of you enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe us to get latest updates about our new uploads.
http://www.youtube.com/user/niveshandnisheeth?sub_confirmation=1
....................................................................................................
Dear Viewers if you like our work and wanted to support us, to keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to the creator’s work every month/ every time they release their new work and get rewards in return. Please visit the following link to know all about our work and what we are offering as the reward to our patrons…
https://www.patreon.com/nisheethsri+

Engine MKII (Autodesk Inventor 2016 Tutorial)

Serial No. 111

Engine MKII (Autodesk Inventor 2016 Tutorial)

The Design of the model ‘Engine MKII’ → ‘Rear Exhaust-2 Shoe’ has been taken from ‘Sample files’ → Autodesk Inventor

In this Inventor Tutorial we will describe how to build the model ‘Engine MKII’ assembly file. It is an Assembly modeling tutorial, it will cover the following topics.

• Use the Assembly commands such as, Place Component, Constrain, Pattern Component, Free Rotate tools etc.
• 38 Parts will be inserted with the help of ‘Place Component’ tool.
• Use the Mate/Flush constrain and Angle mate between the two components with the help of ‘Constrain’ tool.
• Copy the one or more components by using the ‘Pattern Component’ command.
• Check the interference between the two components by using ‘Analyze Interference’ tool.
• Make a View Representation to view the internal components of engine easily.
• Drive the internal components of Engine by using the ‘Drive Constraint’ command.

 

Click the following link to get the model file: - http://bit.ly/2mEIcQe

Extension Spring 3.873 (Autodesk Inventor 2016 Tutorial)2016

Serial No. 251

Extension Spring 3.873  (Autodesk Inventor 2016 Tutorial)

The Design of ‘Extension Spring 3.873’ has been taken from Assembly file of ‘Rear Exhaust-2 Shoe' of Sample files of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.

In this Inventor Tutorial we will describe how to build the model of ‘Extension Spring 3.873’. It is a part modeling tutorial, it will cover the following topics.

• Creating 2D Sketches on different Planes of the model.
• Use the Parameters tool for creating named parameters and relate the named parameters used in 2D sketches, Work Planes and the Coil feature.
• Use the sketch constraints that are applied on during sketch creation.
• Use the features command such as Coil, Sweep and Revolve tool.
• Use the Coil feature for making the compression spring along with the basis of sketch profile and wrap the profile an axis of revolution.

Click the following link to get the model file: -http://bit.ly/2ngUM8N

Carb Spring (Autodesk Inventor 2016 Tutorial)

Serial No. 250

Carb Spring  (Autodesk Inventor 2016 Tutorial)

The Design of ‘Carb Spring’ has been taken from Assembly file of ‘Side Exhaust-2 Shoe' of Sample files of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.

In this Inventor Tutorial we will describe how to build the model of ‘Carb Spring’. It is a part modelling tutorial, it will cover the following topics.

• Creating 2D Sketches on different Planes of the model.
• Use the sketch constraints that are applied on during sketch creation.
• Use the two features command Coil tool and Extrude tool.
• Use the Coil feature for making the compression spring along with the basis of sketch profile and wrap the profile an axis of revolution.

Click the following link to get the model file: -http://bit.ly/2ngWFlS

Flywheel Taper Collar (Autodesk Inventor 2016 Tutorial)

Serial No. 249

Flywheel Taper Collar  (Autodesk Inventor 2016 Tutorial)

 

Click the following link to get the model file: -http://bit.ly/2ngOhCV

Exhaust Manifold Gasket (Autodesk Inventor 2016 Tutorial)

Serial No. 248

Exhaust Manifold Gasket  (Autodesk Inventor 2016 Tutorial)

 

Click the following link to get the model file: -http://bit.ly/2mxdJ6S

Compression Button (Autodesk Inventor 2016 Tutorial)

Serial No. 247

Compression Button  (Autodesk Inventor 2016 Tutorial)

The Design of ‘Compression Button’ has been taken from Assembly file of ‘Rear Exhaust-2 Shoe' of Sample files of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.

In this Inventor Tutorial we will describe how to build the model of ‘Compression Button’. It is a part modelling tutorial, it will cover the following topics.

• Creating 2D Sketches on different Planes of the model.
• Use the sketch constraints that are applied on during sketch creation.
• Use feature commands such as Extrude, Circular Pattern, Chamfer and Hole tool.
• Create a Clearance hole and Tapped hole with the help of Hole tool.
• Creating duplicate features with help of Circular Pattern tool.

Click the following link to get the model file: - http://bit.ly/2msoszj

Flywheel Washer (Autodesk Inventor 2016 Tutorial)

Serial No. 246

Flywheel Washer  (Autodesk Inventor 2016 Tutorial)

Click the following link to get the model file: -http://bit.ly/2mx9EzA

Clutch Bell (Video Tutorial) Autodesk Inventor 2016

Serial No. 245

Clutch Bell (Video Tutorial) Autodesk Inventor 2016

The Design of ‘Clutch Bell’ has been taken from Assembly file of ‘Rear Exhaust-2 Shoe' of Sample files of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.

In this Inventor Tutorial we will describe how to build the model of ‘Clutch Bell’. It is a part modelling tutorial, it will cover the following topics.

• Creating 2D Sketches on different Planes of the model.
• Use the sketch constraints that are applied on during sketch creation.
• Use feature commands such as, Extrude, Circular Pattern, Chamfer and Shell tool.
• Creating duplicate features with help of Circular Pattern tool.

Click the following link to get the model file: -http://bit.ly/2msaayG

Carb Slide (Autodesk Inventor 2016 Tutorial)

Serial No. 244

Carb Slide  (Autodesk Inventor 2016 Tutorial)

 

Click the following link to get the model file: -http://bit.ly/2ngEHQt

Carb High-speed Needle (Autodesk Inventor 2016 Tutorial)

Serial No. 242

Carb High-speed Needle  (Autodesk Inventor 2016 Tutorial)

The Design of ‘Carb Highspeed Needle’ has been taken from Assembly file of ‘Rear Exhaust-2 Shoe' of Sample files of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.

In this Inventor Tutorial we will describe how to build the model of ‘Carb Highspeed Needle’. It is a part modelling tutorial, it will cover the following topics.

• Creating 2D Sketches on different Planes of the model.
• Use the sketch constraints that are applied on during sketch creation.
• Use feature commands such as, Extrude, Revolve and the Loft tool.
• Adds the Loft feature by selecting the two Profiles and set the direction and Weight of the Profile in the ‘Conditions’ field.

Click the following link to get the model file: -http://bit.ly/2oDQjxb

Carb Intake Nipple (Autodesk Inventor 2016 Tutorial)

Serial No. 241

Carb Intake Nipple  (Autodesk Inventor 2016 Tutorial)

 

Click the following link to get the model file: -http://bit.ly/32fJVuS

Rear Exhaust Manifold (Autodesk Inventor 2016 Tutorial)

Serial No. 240

Rear Exhaust Manifold  (Autodesk Inventor 2016 Tutorial)

The Design of ‘Rear Exhaust Manifold’ has been taken from Assembly file of ‘Rear Exhaust-2 Shoe' of Sample files of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.

In this Inventor Tutorial we will describe how to build the model of ‘Rear Exhaust Manifold’. It is a part modelling tutorial, it will cover the following topics.

• Creating 2D Sketches and 3D Sketches on different Planes of the model.
• Create a 3D Sketch curve from intersecting geometry by selecting a surface and work plane with the help of ‘Intersection Curve’ command.
• Use the sketch constraints that are applied on during sketch creation.
• Use feature commands such as, Extrude with surface option, Revolve, Shell, Sweep and the fillet tool.
• Adds the Sweep feature by selecting the Profile and Path.

Click the following link to get the model file: - http://bit.ly/2mfuDXm

Engine Sleeve Rear (Autodesk Inventor 2016 Tutorial)

Serial No. 239

Engine Sleeve Rear ( (Autodesk Inventor 2016 Tutorial)

The Design of ‘Engine Sleeve Rear’ has been taken from Assembly file of ‘Rear Exhaust-2 Shoe' of Sample files of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.

In this Inventor Tutorial we will describe how to build the model of ‘Engine Sleeve Rear’. It is a part modelling tutorial, it will cover the following topics.

• Creating 2D Sketches on different Planes and faces of the model.
• Use the sketch constraints that are applied on during sketch creation.
• Use feature commands such as, Extrude, Revolve, Sweep, Mirror, Chamfer and the fillet tool.
• Adds the angle to the Revolve feature to revolve the profile through the specified angle.
• Adds the Sweep feature with cut option by selecting the Profile and Path.

Click the following link to get the model file: -http://bit.ly/2nNqE4W

Engine Rear Cover (Autodesk Inventor 2016 Tutorial)

Serial No. 238

Engine Rear Cover (Autodesk Inventor 2016 Tutorial)

The Design of ‘Engine Rear Cover’ has been taken from Assembly file of ‘Rear Exhaust-2 Shoe' of Sample files of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.

In this Inventor Tutorial we will describe how to build the model of ‘Engine Rear Cover’. It is a part modelling tutorial, it will cover the following topics.

• Creating 2D Sketches on different Planes and faces of the model.
• Use the sketch constraints that are applied on during sketch creation.
• Use feature commands such as, Extrude, Fillet and the Shell tool.
• Adds the shell feature by selecting a particular face of the part by using the specified thickness.

Click the following link to get the model file: -http://bit.ly/2n3dSz6

Clutch Shoe 2 (Autodesk Inventor 2016 Tutorial)

Serial No. 237

Clutch Shoe 2  (Autodesk Inventor 2016 Tutorial)

 

 

Click the following link to get the model file: -http://bit.ly/2oAvX87

Clutch Nut (Autodesk Inventor 2016 Tutorial)

Serial No. 236

Clutch Nut  (Autodesk Inventor 2016 Tutorial)

The Design of ‘Clutch Nut’ has been taken from Assembly file of ‘Rear Exhaust-2 Shoe' of Sample files of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly.

In this Inventor Tutorial we will describe how to build the model of ‘Clutch Nut’. It is a part modelling tutorial, it will cover the following topics.

• Creating 2D Sketches on different Planes and faces of the model.
• Use the sketch constraints that are applied on during sketch creation.
• Use feature commands such as, Extruded, Revolved, Hole, Chamfer and the fillet tool.
• Adds the Tapped hole on the model by using Hole command.

Click the following link to get the model file: -http://bit.ly/2nNBpUT