Mug-Plastic (Autodesk Inventor 2010)

Serial No. 63

Mug-Plastic (Autodesk Inventor 2010)

 

 

Click the following link to get the model file:- http://bit.ly/2njr96c

Tub-Rectangular (Autodesk Inventor 2010)

Serial No. 102

Tub-Rectangular (Autodesk Inventor 2010)

 

 

Click the following link to get the model file: - http://bit.ly/2nvduJo

Top Cover of Stabilizer (Autodesk Inventor 2010)

Serial No. 100

Top Cover of Stabilizer (Autodesk Inventor 2010)

 

 

Click the following link to get the model file: - http://bit.ly/2o7T8GN

Tiffin Box (Autodesk Inventor 2010)

Serial No. 99

Tiffin Box (Autodesk Inventor 2010)

 

 

Click the following link to get the model file: - http://bit.ly/2o657o8

Table-Steel Frame By Frame Generator (Autodesk Inventor 2010)

Serial No. 96

Table-Steel Frame By Frame Generator (Autodesk Inventor 2010)

 

 

Click the following link to get the model file: - http://bit.ly/2mz0iDm

Strainer (Autodesk Inventor 2010)

Serial No. 91

Strainer (Autodesk Inventor 2010)

 

 

Click the following link to get the model file and drawing sheet: - http://bit.ly/2o5IwIj

Stool (Autodesk Inventor 2010)

Serial No. 90

Stool (Autodesk Inventor 2010)

 

 

Click the following link to get the model file: - http://bit.ly/2lQsVLT

Soap Case (Autodesk Inventor 2010)

Serial No. 86

Soap Case (Autodesk Inventor 2010)

 

 

Click the following link to get the model file: - http://bit.ly/2nn7m6e

Shaving Razor (Autodesk Inventor 2010)

Serial No. 85

Shaving Razor (Autodesk Inventor 2010)

 

 

Click the following link to get the model file and drawing sheet: - http://bit.ly/2lQxYfk

Screw Driver (Autodesk Inventor 2010)

 

Serial No. 84

Screw Driver (Autodesk Inventor 2010)

 

 

Click the following link to get the model file: - http://bit.ly/2nuojve

Round Bowl (Autodesk Inventor 2010)

Serial No. 82

Round Bowl (Autodesk Inventor 2010)

 

Click the following link to get the model file: - http://bit.ly/2nos6KI

Pencil (Autodesk Inventor 2010)

Serial No. 72

Pencil  (Autodesk Inventor 2010)
In this tutorial we would create a model named Pencil. It is created in part modelling environment of Autodesk Inventor. We would just create some 2D sketches and use Extruded Tool and Loft Tool to form a solid. Then would use ‘Split Tool’ to cut its surface to give separate colours over the model. In the end using the Emboss Tool we would write some text over its surface.

 
Click the following link to get the model file: - http://bit.ly/2lLrdeH

Pen Stand (Autodesk Inventor 2010)

Serial No. 71

Pen Stand (Autodesk Inventor 2010)

 

 

Click the following link to get the model file: - http://bit.ly/2nqTN5t

Pipe Collar (Autodesk Inventor 2010)

Serial No. 73

Pipe Collar (Autodesk Inventor 2010)

 

 

Click the following link to get the model file: - http://bit.ly/2nT0UE2

Nozzle (Autodesk Inventor 2010)

Serial No. 68

Nozzle (Autodesk Inventor 2010)

 

 

Click the following link to get the model file: - http://bit.ly/2nSDHBU

Mesh of Table Fan (Autodesk Inventor 2010)

Serial No. 61

Mesh of Table Fan (Autodesk Inventor 2010)
In this Autodesk Assembly tutorial we will demonstrate the creation process of the model named ‘Mesh of Table Fan’.
The assembly contains three components. First part named Mesh Front and Mesh Rear will be created individually which can be termed Bottom Up designing process. At a glance the Mesh Rear and Mesh Front looks quite the same but they are different that is why after completing the first part it’s copy will be taken and it will be modify by changing the sketch dimensions and adding more feature according the design to create second part. Later both components will be put into the assembly and positioned by using mates and the third component is created in context of assembly.
In the tutorial viewers will be able to see the Autodesk Inventor Basic functions like 2D sketching, dimensioning, application of sketch constrain and usage of 3D features like Revolve, Sweep, Loft, Circular and Rectangular Pattern and Extrude etc.

 

 

Click the following link to get the model file and drawing sheet: http://bit.ly/2neUSNX

Measuring Scale (Autodesk Inventor 2010)

Serial No. 60

Measuring Scale (Autodesk Inventor 2010)

 

 

Click the following link to get the model file: - http://bit.ly/2nfchpA