Thursday, December 22, 2016

Nose Pliers (Solid Edge ST9 Tutorial)

Nose Pliers_1

Nose Pliers_2

Serial No. 14

Nose Pliers (Solid Edge ST9 Tutorial)

In this Solid Edge Tutorial we will describe how to build the model ‘Nose Pliers’. It is a part and assembly modelling tutorial.

It will cover the following topics.

........................................................................................................

• Creating 2D Sketches on different Planes/model faces.

• Use the sketch constraints that are applied on during sketch creation.

• How to project the model edges, curves and sketch elements onto the selected sketch plane by using ‘Project to Sketch’ command.

• Project geometry command is very useful tool for creating the various features to build the part.

• Use features command such as Extrude, Revolved, Swept Cutout, Cut, Chamfer, Round etc.

• Use the ‘Swept Cutout’ command to construct a cutout by extruding a cross section along a path you define.

• How to mate the parts by using ‘Flash Fit’ command in the assembly.

• Check the interface between one another parts by using ‘Check Interference’ command.

• Use the ‘Subtract’ command (Boolean) to remove the tool body volume from selected target bodies in the assembly. You can select multiple target bodies and multiple tool bodies.

• How to apply knurl image on the face of the model with the help of ‘Styles’ tool.

• How to change the colour of the model by using ‘Part Painter’ tool.

 

download-Link


Click the following link to get the model file: - http://bit.ly/2onMr3G

No comments:

Post a Comment