Basic Techniques-Revolve and Sweep Features (SolidWorks 2014)

Serial No. 6

Basic Techniques-Revolve and Sweep Features (SolidWorks 2014) 

In this Basic Tutorial of SolidWorks we will demonstrate the utilization of part modeling feature named Revolve and Sweep.
Revolve Feature is used when we want to create a solid by revolving a closed sketch profile through a specified angle and along an axis.
Sweep Feature is used when we want to create a solid using a closed sketch profile and a path.
The aforesaid features are utilized quite an often while designing parts.  This tutorial is picked up from the default tutorials that comes up with the software. You can find its written version under Basic Techniques → Revolves and Sweeps.
Following is the description that is mentioned in the original Tutorial..

In this lesson, you will create the candlestick. This lesson demonstrates:

• Creating a revolve feature
• Creating a sweep feature
• Creating an extruded cut feature with a draft angle

Click the following link to get the model file: - http://bit.ly/2nHGXjM

Getting Started Tutorial Part-1 (SolidWorks 2014)

Serial No. 4

Getting Started Tutorial Part-1 (SolidWorks 2014)

Video Tutorial with Captions

The Design of this model is selected from 'SolidWorks Tutorials':--
Getting Started → Introduction to SolidWorks
The Introduction to SolidWorks lesson guides you through the creation of a part and drawing.
This lesson includes:
Creating base, boss, and cut features from sketches
Adding fillets to smooth edges
Creating a circular pattern
Adding drawing views
Adding centerlines, center marks, and dimensions to the drawing.

 

   Click the following link to get the model file: - http://bit.ly/2ooDruY