Autodesk Inventor Basic Tutorial - Revolve and Sweep Feature

(Tutorial Concept Courtesy – Default SolidWorks Software Help)

In this tutorial we would learn about the Revolve and Sweep Feature of Autodesk Inventor by developing a solid named Candle Stick.
Besides this we would also learn how to Extrude with Taper Angle.




Click the following link to get the model file: - http://bit.ly/36AXY0Y

Basic Techniques-Revolve and Sweep Features (SolidWorks 2014)

Serial No. 6

Basic Techniques-Revolve and Sweep Features (SolidWorks 2014) 

In this Basic Tutorial of SolidWorks we will demonstrate the utilization of part modeling feature named Revolve and Sweep.
Revolve Feature is used when we want to create a solid by revolving a closed sketch profile through a specified angle and along an axis.
Sweep Feature is used when we want to create a solid using a closed sketch profile and a path.
The aforesaid features are utilized quite an often while designing parts.  This tutorial is picked up from the default tutorials that comes up with the software. You can find its written version under Basic Techniques → Revolves and Sweeps.
Following is the description that is mentioned in the original Tutorial..

In this lesson, you will create the candlestick. This lesson demonstrates:

• Creating a revolve feature
• Creating a sweep feature
• Creating an extruded cut feature with a draft angle

Click the following link to get the model file: - http://bit.ly/2nHGXjM